Dell 36XX, 34XX, 38XX, 32XX manual Resume SSD Cache, Revive Disk Group, Resume ssdCache ssdCacheName

Resume SSD Cache

Description

This command restarts the caching for all virtual disks using the SSD cache that was temporarily stopped with the suspend ssdCache command.

Syntax

resume ssdCache [ssdCacheName]

Parameter

Parameter	Description
ssdCache	The alphanumeric identifier (including - and _) of
	the SSD cache that you want to resume. Enclose
	the identifier in square brackets ([ ]). If the SSD
	cache name contains special characters or consists
	only of numbers, you also must enclose the
	identifier in double quotation marks (" ") inside
	square brackets.

Revive Disk Group

Description

This command forces the specified disk group and associated failed physical disks to the Optimal state. All physical disks assigned to the disk group must be installed before you attempt to run this command.

CAUTION: Correct use of this command depends on the data configuration on all of the physical disks in the disk group. Never attempt to revive a physical disk unless supervised by a Customer or Technical Support representative.

Syntax

revive diskGroup [diskGroupNumber]

Parameter

Parameter	Description
diskGroup	Number of the disk group to be set to the optimal
	state. You must put brackets ([ ]) around the disk
	group number.

267