Dell 34XX Set Virtual Disk Attributes For a Disk Pool, PreReadRedundancyCheck, LogicalUnitNumber

Parameter	Description
userLabel	Specifies the new name to give an existing virtual
	disk. You must put quotation marks (" ") around the
	new virtual disk name.
preReadRedundancyCheck	The setting to check the consistency of RAID
	redundancy data on the stripes during read
	operations. Do not use this operation for
	nonredundant virtual disks, for example RAID Level
	0. To check redundancy consistency, set this
	parameter to TRUE. For no stripe checking, set this
	parameter to FALSE.
accessVirtualDisk	Specifies the logical unit number for the access
	virtual disk. The logical unit number is the only
	property that you can set for the access virtual
	disk.
	NOTE: If you specify the
	accessVirtualDisk parameter, the only
	property that you can set is the
	logicalUnitNumber.
logicalUnitNumber	Defines specific virtual disk-to-LUN mappings to
	an individual host or assigns the host to a host
	group.
host	Specifies the name of the host to which the virtual
	disk is mapped. You must put quotation marks (" ")
	around the host name.
hostGroup	Specifies the name of the host group to which the
	virtual disk is mapped. You must put quotation
	marks (" ") around the host group name.

NOTE: When using this command, you can specify one or more of the parameters. You do not, however, need to use all of the parameters.

NOTE: You can apply the addCapacity, segmentSize, userLabel, and logicalUnitNumber parameters to only one virtual disk at a time.

NOTE: Setting the addCapacity, addPhysicalDisks, or segmentSize parameter starts a long- running operation that you cannot stop. These long-running operations are performed in the background and do not prevent you from running other commands. To display the progress of long-running operations, use the show virtualDisk actionProgress command.

Set Virtual Disk Attributes For A Disk Pool

Description

This command defines the properties for a virtual disk. You can use most parameters to define properties for one or more virtual disks. You also can use some parameters to define properties for only one virtual

332