Dell 34XX, 38XX, 32XX Save Storage Array Performance Statistics, Save Storage Array SAS PHY Counts

Parameter	Description
file	The name of the file to which you want to save the
	performance statistics. Enclose the file name in
	double quotation marks (" ").
	NOTE: This command does not automatically
	append a file extension to the new file. You
	must specify the file extension when you enter
	the file name.

NOTE: If you have not reset the iSCSI baseline statistics since the RAID controller module start‑of‑day, the time at the start‑of‑day is the default baseline time.

Save Storage Array Performance Statistics

Description

This command saves the performance statistics to a file. Before you use this command, issue the set session performanceMonitorInterval and set session performanceMonitorIterations commands to specify how often statistics are collected.

Syntax

save storageArray performanceStats file="filename"

Parameters

Parameter	Description
file	Specifies name of the file to which to save the
	performance statistics. You must put quotation
	marks (" ") around the file name.

Save Storage Array SAS PHY Counts

Description

This command saves the storage array SAS physical layer (SAS PHY) counters to a file. To reset the SAS PHY counters, run the Reset Storage Array SAS PHY Baseline command. See Reset Storage Array SAS PHY Baseline.

Syntax

save storageArray SASPHYCounts file="filename"

280