Dell 36XX, 34XX, 38XX, 32XX manual Recover RAID Virtual Disk, CopyType

Parameter	Description
copyType	Creates a virtual disk copy with or a snapshot
	which enables you to continue to write to the
	source virtual disk while creating the virtual disk
	copy. To reinitiate a virtual disk copy with a
	snapshot, set this parameter to online. To
	reinitiate a virtual disk copy without a snapshot, set
	this parameter to offline.

Recover RAID Virtual Disk

This command creates a RAID virtual disk with the given properties without initializing any of the user data areas on the physical disks. Parameter values are derived from the Recovery Profile data file (recovery-profile.csv) for the storage array. You can create the recover virtual disk in an existing disk group or create a new disk group by using this command.

NOTE: You can run this command only from a command line. You cannot run this command from the GUI script editor. You cannot use the storage managment GUI to recover a virtual disk.

Syntax

recover virtualDisk (physicalDisk=(enclosureID,drawerID,slotID) physicalDisks=(enclosureID1,drawerID1,slotID1

... enclosureIDn,drawerIDn,slotIDn) diskGroup=diskGroupName)) [newDiskGroup=diskGroupName] userLabel="virtualDiskName" virtualDiskWWN="virtualDiskWWN" capacity=virtualDiskCapacity

offset=offsetValue raidLevel=(0 1 5 6) segmentSize=segmentSizeValue dssPreallocate=(TRUE FALSE) SSID=subsystemVirtualDiskID [owner=(0 1)] [cacheReadPrefetch=(TRUE FALSE)] [allocateReservedSpace=(TRUE FALSE)] [dataAssurance=(none enabled)]

Parameters

Parameter	Description
physicalDisk or physicalDisks	The physical disks that you want to assign to the
	disk group that will contain the virtual disk that you
	want to recover. For high-capacity expansion
	enclosures, specify the enclosure ID value, the
	drawer ID value, and the slot ID value for each
	physical disk that you assign to the virtual disk. For
	low-capacity expansion enclosures, specify the
	enclosure ID value and the slot ID value for each
	physical disk that you assign to the virtual disk.
	Enclosure ID values are 0 to 99. Drawer ID values
	are 0 to 4. Slot ID values are 0 to 31. Enclose the

235