Parameters

Description

 

 

 

Enclose the snapshot virtual disk name in double

 

quotation marks (" ").

count

The number of repository virtual disks that you

 

want to remove from the snapshot group. Use

 

integer values.

Notes

When you use this command, you can specify only one of the parameters. You cannot enter more than one parameter when you run this command.

Set Storage Array

NOTE: With firmware version 8.10 the cacheFlushStop parameter is deprecated and will be removed in a future release of storage management software.

Description

The means of registering the iSCSI target on the iSNS server. Set the parameter to TRUE to list an iSCSI target. When you set this parameter to TRUE you must also use these parameters for IPV4 configurations:

isnsIPV4ConfigurationMethod

isnsIPV4Address

When you set this parameter to TRUE you must also use these parameters for IPV6 configurations:

isnsIPV6Address

Optionally, you can also use the isnsListeningPort parameter to define the port monitor and manage traffic to the server. To remove the registration for the storage array from the iSNS server set this parameter to FALSE

Syntax

set storageArray (cacheBlockSize=cacheBlockSizeValue cacheFlushStart=cacheFlushStartSize defaultHostType=("hostTypeName" "hostTypeIdentifier") failoverAlertDelay=delayValue mediaScanRate=(disabled 1-30)

userRole=(admin monitor) password="password" userLabel="storageArrayName" isnsRegistration=(TRUE FALSE))

Parameters

Parameter

Description

 

 

cacheBlockSize

The cache block size that is used by the RAID

 

controller module for managing the cache. Valid

319

Page 319
Image 319
Dell 36XX, 34XX, 38XX, 32XX Set Storage Array, IsnsIPV4ConfigurationMethod IsnsIPV4Address, IsnsIPV6Address, CacheBlockSize