Dell 38XX, 34XX, 32XX, 36XX manual Minimum Firmware Level, AllSnmpCommunities, CommunityName

Parameters

Parameter	Description
allSnmpCommunities	This parameter returns information about all of the
	SNMP communities in the storage array.
communityName	The name of the SNMP community for which you
	want to retrieve information. Enclose the SNMP
	community name in double quotation marks (" ").
snmpCommunities	The names of several SNMP communities for
	which you want to retrieve information. Enter the
	names of the SNMP communities using these
	rules:
	• Enclose all of the names in square brackets ([ ]).
	• Enclose each of the names in double quotation
	marks (" ").
	• Separate each of the names with a space.
summary	This parameter returns a list of the total number of
	SNMP communities and the total number of SNMP
	trap destinations. When you use this parameter
	information detail is omitted.

Notes

SNMP supports one or more communities to which managers and managed devices belong. SNMP requests contain a community string in the data packets passed over the network that acts as a crude password. SNMP agents can reject GET or SET requests with an unrecognized community string. A community string is also included in TRAP notifications sent from agent to manager as well.

The embedded SNMP agent supports both IPV4 and IPV6.

This command returns SNMP community information similar to this example.

SNMP COMMUNITIES------------------------------ SUMMARY

Total SNMP Communities: 2

Total SNMP Trap Destinations: 1

DETAILS

SNMP Community: TestComm1

SNMP Permission: Read Only

Associated Trap Destination:

Trap Receiver IP Address: 10.113.173.133

Send Authentication Failure Traps: true

SNMP Community: Test2

SNMP Permission: Read Only Associated Trap Destination:

Minimum Firmware Level

8.10

353