Dell 32XX, 34XX Start Disk Pool Locate, Start Enclosure Blink, Start diskPool diskPoolName locate

NOTE: Higher-level virtual disks that are specifically related to premium features (Snapshot, Remote Virtual Disk Replication, Virtual Disk Copy, mapping, and persistent reservations) are removed as part of the import operation. You must run the show diskGroup importDependencies command before you run the start diskGroup import command.

Start Disk Pool Locate

Description

This command initiates a location operation on all of the physical disks that comprise the specified disk pool.

Syntax

start diskPool [diskPoolName] locate

Parameters

Parameter	Description
diskPool	The alphanumberic identifier of the disk pool
	(including – and _) that you want to locate.
	Enclose the diskPoolName in square brackets ([ ]).

Start Enclosure Blink

Description

This command identifies an enclosure by turning on the indicator LED. (Use the stop enclosure blink command to turn off the indicator LED for the enclosure.)

Syntax

start enclosure [enclosureID] blink

Parameters

Parameter	Description
enclosure	Identifies the enclosure to blink. Enclosure ID
	values are 0 to 99. You must put brackets ([ ])
	around the enclosure ID value.

382