Dell 36XX, 34XX, 38XX, 32XX manual Stop Snapshot Legacy, virtualDiskName, VirtualDiskName

Parameter	Description
	pending snapshot images. Enclose the snapshot
	group identifier in square brackets ([ []).
consistencyGroup	The alphanumeric identifier (including - and _) of
	the snapshot consistency group for which you
	want to stop pending snapshot images. Enclose
	the snapshot group identifier in square brackets
	([ []).

Stop Snapshot (Legacy)

Description

This command stops a copy-on-write operation.

Syntax

stop snapshot (virtualDisk [virtualDiskName] virtualDisks [virtualDiskName1... virtualDiskNameN])

Parameters

Parameter	Description
virtualDisk or virtualDisks	The name of the specific virtual disk for which you
	want to stop a copy-on-write operation. You can
	enter more than one virtual disk name.
	Enclose the virtual disk names using one of these
	forms:
	• On a Windows command line:
	\"virtualDiskName\"
	• In a Windows script engine window:
	["virtualDiskName"]
	• On a Linux command line:
	\"virtualDiskName\"
	• In a Linux script engine window:
	[\"virtualDiskName\"]

Notes

Names can be any combination of alphanumeric characters, underscore (_), hyphen (-), and pound (#). Names can have a maximum of 30 characters.

One technique for naming the snapshot (legacy) virtual disk and the snapshot (legacy) repository virtual disk is to add a hyphenated suffix to the original base virtual disk name. The suffix distinguishes between the snapshot (legacy) virtual disk and the snapshot (legacy) repository virtual disk. For example, if you have a base virtual disk with a name of Engineering Data, the snapshot (legacy) virtual disk can have a name of Engineering Data-S1, and the snapshot (legacy) repository virtual disk can have a name of EngineeringData- R1.

399