Additional Information

To successfully run this command, the following conditions must be met:

All physical disks in the disk group must be self-encrypting disk (SED) physical disks.

The Physical Disk Security premium feature must be enabled.

The storage array security key must be set.

The disk group must be Optimal, and not have snapshot virtual disks or repository virtual disks.

The RAID controller module firmware creates a lock that restricts access to the SED physical disks. SED physical disks have a state called Security Capable. When you create a security key, the state is set to Security Enabled, which restricts access to all SED physical disks that exist within the storage array.

Enable Disk Pool Security

Description

This command converts a non-secure disk pool to a secure disk pool.

Syntax

enable diskPool [diskPoolName] security

Parameter

Parameter

Description

 

 

diskPool

The alphanumeric identifier (including - and _) of

 

the disk pool that you want to place in the Security

 

Enabled state. Enclose the disk pool identifier in

 

square brackets ([ ]).

Notes

All of the physical disks that comprise the disk pool must be security capable.

Enable or Disable ODX

This command turns on or turns off Offloaded Data Transfer (ODX) for a storage array. The storage array comes with ODX turned on. Use this command to turn off ODX if you do not want to run ODX, or if ODX is causing issues with the storage array. The only storage array that is affected is the storage array on which the command is run.

Syntax

set storageArray odxEnabled=(TRUE FALSE)

226

Page 226
Image 226
Dell 32XX, 34XX, 38XX Enable Disk Pool Security, Enable or Disable ODX, Enable diskPool diskPoolName security, DiskPool