Dell 36XX, 34XX, 38XX Scheduling Snapshots, For example startDate=062711, ScheduleDay=wednesday

Parameters

Parameter	Description
enable	Enable automatic collection of support bundles
	when a critical MEL event is detected.
disable	Disable automatic collection of support bundles
	where the feature was previously enabled.
all	Apply the command to all storage arrays detected
	from the host.
storageArrayName	Apply the command to the named storage array.
data	Store the data generated by the command at the
	location specified by the pathName.

Scheduling Snapshots

NOTE: This command is applicable to both the Snapshot and the Snapshot (Legacy) premium feature.

Description

You can use the enableSchedule and the schedule parameters to schedule automatic snapshots. Automatic snapshots can be scheduled daily, weekly, or monthly (by day or by date). The enableSchedule parameter turns on or off the ability to schedule snapshots. When you enable scheduling, you use the schedule parameter to define when you want the snapshots to occur.

Parameters

Parameter	Description
immediate	Begins a snapshot operation immediately; a
	snapshot virtual disk is created and a copy-on-
	write operation begins.
startDate	Defines a specific start date snapshot virtual disk
	creation. The format for this option is MM:DD:YY. If
	no start date is provided, the current date is used.
	For example: startDate=06:27:11.
scheduleDay	Defines a day of the week you want to create a
	snapshot virtual disk and perform a copy-on-write
	operation. The values that you can enter are:
	monday, tuesday, wednesday, thursday,
	friday, saturday, sunday, and all. For example:
	scheduleDay=wednesday.
startTime	Defines time of a day you want to create a
	snapshot virtual disk and start performing a copy-
	on-write operation. The format for entering the

283