Dell 34XX Controller 01 contentType=raidConfigration all, Validator, SourceLocation, ContentType

[controller [(01)]] [contentType=(raidConfigration all)]

Parameters

Parameter	Description
file	The file path and the file name of the DBM
	database you want to upload. Enclose the file
	name in double quotation marks (" "). For example:
	file="C:\Array Backups
	\DBMbackup_03302010.dbm". This command
	does not automatically append a file extension to
	the saved file. You must specify a file extension
	when entering the file name.
validator	The alphanumeric security code required to
	restore a storage array to an existing configuration.
	Use the save storageArray dbmValidator
	command to generate the required validation
	information XML file.
sourceLocation	This parameter specifies the location from which
	to retrieve backup database information. The
	parameter must be included for consistency, but
	the only allowed value is onboard.
controller	This parameter specifies the RAID controller
	module from which data will be exclusively
	retrieved, if sourceLocation is set to cache.
	Enclose the RAID controller module identifier in
	square brackets ([ ]). If the controller parameter
	is not specified, data might be retrieved from either
	RAID controller module.
	Valid RAID controller module identifiers are 0 or 1,
	where 0 is the RAID controller module in slot 0,
	and 1 is the RAID controller module in slot 1.
contentType	This parameter specifies the content type of the
	data that is retrieved.
	• If the parameter is set to raidConfiguration,
	the RAID configuration data is retrieved. The
	RAID configuration data includes disk groups
	and associated virtual disks.
	• If the parameter is set to all, all of the data
	including disk pool configuration data is
	retrieved.
	The default is raidConfiguration.

232