Dell 36XX, 34XX, 38XX, 32XX manual

Recurring Syntax	Syntax Value
	IPV4SubnetMask=ipv4-address
	IPV4VlanID=integer
	IPV6VlanID=integer
	maxFramePayload=integer
	tcpListeningPort=tcp-port-id

instance-based-repository-spec

count-based-repository-spec

NOTE: You must set the enableIPV4 parameter or the enableIPV6 parameter to TRUE to ensure that the specific IPV4 or IPV6 setting is applied.

NOTE: The IPV6 address space is 128 bits. It is represented by eight 16-bit hexadecimal blocks separated by colons. You may drop leading zeros, and use a double colon to represent consecutive blocks of zeroes.

repositoryRAIDLevel=repository-raidlevel

repositoryPhysicalDisks=(physical diskspec- list)

[enclosureLossProtect=boolean] repositoryDiskGroup=virtual-diskgroup- number [freeCapacityArea=integer-literal]

Specify repositoryRAIDLevel with repositoryPhysicalDisks. Do not specify RAID level or physical disks with a disk group. Do not set enclosureLossProtect when specifying a disk group.

NOTE: For enclosure loss protection to work, each physical disk in a disk group must be on a separate enclosure. If you set enclosureLossProtect=TRUE and have selected more than one physical disk from any one enclosure, the storage array returns an error. If you set enclosureLossProtect=FALSE, the storage array performs operations, but the disk group you create might not have enclosure loss protection.

NOTE: To determine if a free capacity area exists, issue the show diskGroup command.

repositoryRAIDLevel=repository-raidlevel

repositoryPhysicalDiskCount=integerliteral

35