Dell 34XX, 38XX, 32XX, 36XX manual Check Virtual Disk Consistency, RemoteStorageArrayNameWwid

Parameters

Parameter	Description
remoteStorageArrayName	The name for the remote storage array for which
	you are checking connectivity. Enclose the storage
	array name in double quotation marks (" ").
remoteStorageArrayNameWwid	The World Wide Identifier (WWID) of the storage
	array for which you are checking connectivity. You
	can use the WWID instead of the storage array
	name to identify the storage array. Enclose the
	WWID in angle brackets (< >).

Notes

Before a replication can be established between two storage arrays, they must be connected through a Fibre Channel connection or an iSCSI connection.

Fibre Channel remote replication must be activated on both storage arrays before they can communicate with each other for replicating or connectivity checking.

If the local storage array supports iSCSI, connectivity over iSCSI is checked. If the local storage array supports Fibre Channel and replicating over Fibre Channel has been activated, connectivity over Fibre Channel is checked. If the local storage array does not support iSCSI or Fibre Channel, an error message is displayed and the operation aborted.

Check Virtual Disk Consistency

Description

This command checks a virtual disk for consistency and media errors, and writes the results of the check to a file.

Syntax

check virtualDisk [virtualDiskName] consistency [consistencyErrorFile=filename] [mediaErrorFile=filename]

[priority=(highest high medium low lowest)] [startingLBA=LBAvalue] [endingLBA=LBAvalue] [verbose=(TRUE FALSE)]

Parameters

Parameter	Description
virtualDisk	Name of the specific virtual disk to check
	consistency. You must put brackets ([ ]) around the
	virtual disk name. If the virtual disk name has

148