Dell 38XX, 34XX, 32XX, 36XX manual Set Consistency Group Attributes, Syntax

NOTE: If you also use the scheduleInterval option, the lowest value of the timesPerDay option and the scheduleInterval option is used. The value is determined by calculating an integer value for the scheduleInterval option. Divide 1440 by the scheduleInterval option value that you set. For example, 1440/180 = 8. This value is then compared to the timesPerDay integer value and the calculated scheduleInterval integer value; the smaller value is then used.

Set Consistency Group Attributes

Description

This command defines the properties for a snapshot consistency group.

Syntax

set consistencyGroup ["consistencyGroupName"] [userLabel="consistencyGroupName"] [repositoryFullPolicy=(failBaseWrites purgeSnapImages)] [repositoryFullLimit=percentValue] [autoDeleteLimit=numberOfSnapImages] [rollbackPriority=(lowest low medium high highest)]

Parameters

Parameter	Description
consistencyGroupName	The name of the consistency group for which you
	are setting properties. Enclose the consistency
	group name in double quotation marks (" ") inside
	square brackets ([ ]).
userLabel	The new name that you want to give to the
	snapshot consistency group. Enclose the new
	consistency group name in double quotation
	marks (" ").
repositoryFullPolicy	How you want snapshot processing to continue if
	the snapshot repository virtual disks are full. You
	can choose to fail writes to the base virtual disk
	(failBaseWrites) or delete (purge) the snapshot
	images (purgeSnapImages). The default action is
	purgeSnapImages.
repositoryFullLimit	The percentage of repository capacity at which
	you receive a warning that the snapshot repository
	virtual disk is nearing full. Use integer values. For
	example, a value of 70 means 70 percent. The
	default value is 75.
autoDeleteLimit	The maximum number of snapshot images that
	you want to automatically delete if you have
	selected to purge the snapshot images for a
	repository full policy. The default value is 32.

285