Dell 34XX, 38XX, 32XX, 36XX manual Medium, low, or lowest

NOTE: Starting with firmware 8.10, some RAID controller modules no longer support the writeOrder parameter and the writeMode parameter.

Syntax

set remoteReplication (localVirtualDisk [virtualDiskName] localVirtualDisks [virtualDiskName1 ... virtualDiskNameN]) [role=(primary secondary)]

[syncPriority=(highest high medium low lowest)] [autoResync=(enabled disabled)] [writeOrder=(preserved notPreserved)] [writeMode=(synchronous asynchronous)] [force=(TRUE FALSE)]

Parameters

Parameter	Description
localVirtualDisk	The name local virtual disk for which you want to
	define properties. Enclose the primary virtual disk
	name in square brackets ([ ]). If the primary virtual
	disk name has special characters or numbers, you
	must enclose the primary virtual disk name in
	double quotation marks (" ") inside square brackets.
localVirtualDisks	The names of several local virtual disks for which
	you want to define properties. Enter the names
	virtual disks using these rules:
	• Enclose all names in square brackets ([ ]).
	• Separate each names with a space.
	If the virtual disk names have special characters or
	consist only of numbers, enter the names using
	these rules:
	• Enclose all names in square brackets ([ ]).
	• Enclose each names in double quotation marks
	(" ").
	• Separate each names with a space.
role	The setting for the local virtual disk to act as the
	primary virtual disk or the secondary virtual disk. To
	define the virtual disk as the primary virtual disk, set
	this parameter to primary. To define the virtual
	disk as the secondary virtual disk, set this
	parameter to secondary. This parameter applies
	only when the virtual disk is part of a replication
	relationship.
syncPriority	The priority that full synchronization has relative to
	host I/O activity. Valid values are highest, high,
	medium, low, or lowest.
autoResync	The settings for automatic resynchronization
	between the primary virtual disks and the

304