Dell 36XX, 34XX, 38XX, 32XX manual Diagnose RAID Controller Module, Schedule RetainRepositoryMembers

Parameters

Parameter	Description
allVirtualDisks	This parameter deletes all of the virtual disks on a
	disk pool.
virtualDisk or virtualDisks	The name of the virtual disk that you want to
	delete. You can enter more than one virtual disk
	name. Enclose the virtual disk name in square
	brackets ([ ]). If the virtual disk name has special
	characters, you also must enclose the virtual disk
	name in double quotation marks (" ").
removeDiskGroup	Deleting the last virtual disk in a disk group does
	not delete the disk group. You can have a
	standalone disk group (minus any virtual disks). To
	remove the standalone disk group, set this
	parameter to TRUE. To keep standalone disk
	groups intact, set this parameter to FALSE.
force	Use this parameter to force the immediate deletion
	of a virtual disk even if the RAID controller modules
	are performing other operations. To immediately
	force the deletion of a virtual disk, set this
	parameter to TRUE. To wait until the RAID
	controller modules have finished performing other
	operations, do not use this parameter or set this
	parameter to FALSE.
schedule
retainRepositoryMembers	When you delete a thin virtual disk, the associated
	repository virtual disk is deleted by default.
	However, when the retainRepositoryMembers
	is set to TRUE, the repository virtual disk is retained.
	For normal virtual disks, this parameter has no
	effect.

Notes

When you use the allVirtualDisks parameter, this command deletes virtual disks until all of the virtual disks are removed or until an error is encountered. If an error is encountered, this command does not try to delete the remaining virtual disks. Deleting virtual disks from different disk groups is possible. All of the disk groups that become empty are deleted if you set the removeDiskGroup parameter to TRUE.

Diagnose RAID Controller Module

Description

This command runs diagnostic tests on the RAID controller module.

215