Dell 32XX, 34XX, 38XX, 36XX manual Clear Remote Replication Fault, All, AsyncRemoteReplicationGroups

Clear Remote Replication Fault

Description

This command clears a remote replication "sticky" fault from one or more remote replication groups and one or more remote replication group member virtual disks.

A remote replication group and its member virtual disks can encounter remote replication "sticky" faults, which occur at a single point-in-time but do not impact the functionality of the replications. These type of faults must be reviewed, but do not require any changes to the configuration.

A remote replication group and its member virtual disks can have more than one associated “sticky” fault. This command clears all of the faults associated with the remote replication group and its member virtual disk. However, if a remote replication group has a fault and one of its member virtual disks has a fault, clearing the fault on the remote replication group does not clear the fault on its member virtual disk.

Syntax

clear asyncRemoteReplicationFault(all asyncRemoteReplicationGroup [" asyncRemoteReplicationGroupName"] asyncRemoteReplicationGroups ["asyncRemoteReplicationGroupName1" ...

"asyncRemoteReplicationGroupNameN"]

virtualDisk ["virtualDiskName"] virtualDisks ["virtualDiskName1" ...

"virtualDiskNameN"])

Parameters

Parameter	Description
all	Use this parameter if you want to clear all remote
	replication faults from all remote replication
	groups and on all remote replication group
	member virtual disks.
asyncRemoteReplicationGroup	The name of the remote replication group from
	which you want to clear the remote replication
	fault. Enclose the remote replication group name
	in square brackets ([ ]). If the remote replication
	group name has special characters, you also must
	enclose the remote replication group name in
	double quotation marks (" ").
asyncRemoteReplicationGroups	The names of several remote replication groups
	from which you want to clear the remote
	replication fault. Enter the names of the remote
	replication groups using these rules:
	• Enclose all of the names in square brackets ([ ]).
	• Enclose each of the names in double quotation
	marks (" ").
	• Separate each of the names with a space.

150