Dell 32XX, 34XX, 38XX, 36XX manual Set Storage Array Enclosure Positions, EnclosurePostions

Passwords are stored on each storage array. For best protection, the password must meet these criteria:

•The password must be between eight and 30 characters long.

•The password must contain at least one uppercase letter.

•The password must contain at least one lowercase letter.

•The password must contain at least one number.

•The password must contain at least one non-alphanumeric character, for example, < > @ +.

NOTE: If you are using self encrypting physical disks in your storage array, you must use these criteria for your storage array password.

Set Storage Array Enclosure Positions

Description

This command defines the position of the enclosures in a storage array. You must include all of the enclosures in the storage array when you enter this command.

Syntax

set storageArray enclosurePositions=(controller enclosureID... enclosureIDn)

Parameter

Parameter	Description
enclosurePostions	A list of all of the enclosure IDs. The sequence of
	the enclosure IDs in the list defines the positions
	for the RAID enclosure and the expansion
	enclosures in a storage array. Valid values are 0 to
	99. Enter the enclosure ID values separated by a
	space. Enclose the list of enclosure ID values in
	parentheses. For storage arrays where the RAID
	enclosure has a predefined identifier that is not in
	the range of valid enclosure position values, use
	the RAID controller module value.

Additional Information

This command defines the position of an enclosure in a storage array by the position of the enclosure ID in the enclosurePositions list. For example, if you have a RAID enclosure with an ID set to 84 and expansion enclosures with IDs set to 1, 12, and 50, the enclosurePositions sequence (84 1 12 50) places the RAID enclosure in the first position, expansion enclosure 1 in the second position, expansion enclosure 12 in the third position, and expansion enclosure 50 in the fourth position. The enclosurePositions sequence (1 84 50 12) places the RAID enclosure in the second position, expansion enclosure 1 in the first position, expansion enclosure 50 in the third position, and expansion enclosure 12 in the fourth position.

322