Dell 32XX, 34XX, 38XX, 36XX manual Resume Remote Replication, Primary or primaries

Parameter	Description
	• An identifier for the snapshot image in the
	consistency group.
	The identifier for the snapshot image can be one of
	these:
	• An integer value that is the sequence number
	of the snapshot in the consistency group.
	• NEWEST - Use this option when you want to
	show the latest snapshot image created in the
	consistency group.
	• OLDEST - Use this option when you want to
	show the earliest snapshot image created in the
	consistency group.
	Enclose the snapshot image name in double
	quotation marks (" ").

Notes

The name of a snapshot image has two parts separated by a colon (:):

•The identifier of the snapshot group

•The identifier of the snapshot image

For example, if you want to restart a copy-on-write operation for snapshot image 12345 which is in snapshot consistency group snapgroup1 in a consistency group snapshot virtual disk that has the name snapVol1, you would use this command:

resume cgSnapVirtualDisk ["snapVol1"] cgSnapImage=["snapgroup1:12345"]

Resume Remote Replication

Description

NOTE: This command valid only with Fibre Channel storage arrays.

This command resumes a suspended Remote Replication operation.

Syntax

resume remoteReplication (primary [virtualDiskName] primaries [virtualDiskName1 ... virtualDiskNameN]) [writeConsistency=(TRUE FALSE)]

Parameters

Parameter	Description
primary or primaries	The name of the primary virtual disk for which you
	want to resume operation. More than one primary
	virtual disk name can be entered. Enclose the
	primary virtual disk name in square brackets ([ ]). If
	the primary virtual disk name has special

262