Dell 36XX Download Storage Array Firmware/NVSRAM, Download Storage Array Physical Disk Firmware

Download Storage Array Firmware/NVSRAM

Description

This command downloads firmware and, optionally, NVSRAM values for the RAID controller module in the storage array. If you want to download only NVSRAM values, use the downLoad storageArray NVSRAM command.

Syntax

download storageArray firmware [, NVSRAM] file="filename" [, "NVSRAM-filename"] [downgrade=(TRUE FALSE)] [activateNow=(TRUE FALSE)]

Parameters

Parameter	Description
NVSRAM	Specifies that you want to download a file with
	NVSRAM values when you download a firmware
	file. You must not put brackets around this
	parameter. Include a comma after the term
	firmware.
file	File path and name of the file that contains the
	firmware. Valid file names must end with a .dlp
	extension. You must put quotation marks (" ")
	around the file name.
NVSRAM-filename	File path and name of the file that contains the
	NVSRAM values. Valid file names must end with
	a .dlp extension. You must put quotation marks (" ")
	around the NVSRAM file name. You must include a
	comma after the firmware file name.

downgrade

activateNow

Specifies that you are loading firmware that is a previous version. The default value is FALSE. Set downgrade to TRUE if you want to download an earlier version of firmware.

Activates the firmware and NVSRAM images. The default value is TRUE. If you set activateNow to FALSE, you must use the activate storageArray firmware command to activate the firmware and NVSRAM values at a later time.

Download Storage Array Physical Disk Firmware

Description

This command downloads firmware images to all of the physical disks in the storage array.

223