The tcpListeningPort option is 3260.

Set Read-Only Snapshot Virtual Disk To A Read/Write Virtual Disk

Description

This command changes a snapshot virtual disk that is a read-only virtual disk to a snapshot virtual disk that is read/write virtual disk. You can also use this command to define the repository for the read/write virtual disk.

Syntax

set snapVirtualDisk ["snapImageVirtualDiskName"] convertReadOnlyToReadWrite (repositoryVirtualDisk="repos_xxxx" repositoryFullLimit=percentValue)

Parameters

Parameter

Description

 

 

snapVirtual Disk

The name of the snapshot virtual disk that you

 

want to change from read-only to read/write.

 

Enclose the snapshot virtual disk identifier in

 

double quotation marks (" ") inside of square

 

brackets ([ ]).

repositoryVirtualDisk

The name of the repository virtual disk has the

 

snapshot image. All repository identifiers have this

 

form: repos_xxxx where xxxx represents a four

 

digit numerical value. Enclose the snapshot virtual

 

disk name in double quotation marks (" ").

repositoryFullLimit

The percentage of repository virtual disk capacity

 

at which you receive a warning that the snapshot

 

image repository virtual disk is nearing full. Use

 

integer values. For example, a value of 70 means

 

70 percent. The default value is 75.

Notes

The repository virtual disk name is automatically created by the MD storage management software and the firmware when you create a new snapshot group. You cannot rename the repository virtual disk because renaming the repository virtual disk will break the linkage with the snapshot images.

Set Remote Replication

Description

NOTE: This command is valid only with Fibre Channel storage arrays.

This command defines the properties for a remote replication pair.

303

Page 303
Image 303
Dell 36XX, 34XX, 38XX, 32XX manual Set Remote Replication, SnapVirtual Disk