Dell 34XX, 38XX, 32XX, 36XX manual Rename a Snapshot Virtual Disk, Host

Parameter	Description
	CAUTION: The host agent uses the access
	virtual disks to communicate in-band with a
	storage array. If you remove an access virtual
	disk mapping for a storage array from a host
	that has an agent running on it, the storage
	management software is no longer able to
	manage the storage array through the in-
	band agent.
host	Name of the host to which the virtual disk is
	mapped. You must put quotation marks (" ") around
	the host name.
hostGroup	Name of the host group that contains the host to
	which the virtual disk is mapped. You must put
	quotation marks (" ") around the host group name.

NOTE: You must use the host and hostGroup parameters when specifying a nonaccess virtual disk or an access virtual disk. The script engine ignores the host or hostGroup parameters when you use the allVirtualDisks or virtualDisks parameters.

Rename A Snapshot Virtual Disk

Description

This command renames an existing snapshot virtual disk.

Syntax

set snapVirtualDisk ["snapVirtualDiskName"] userLabel="snapImageVirtualDiskName"

Parameters

Parameter	Description
snapVirtualDisk	The name of the snapshot virtual disk that you
	want to rename. Enclose the snapshot virtual disk
	name in double quotation marks (" ") inside of
	square brackets ([ ]).
userLabel	A new name that you want to give to the snapshot
	virtual disk. Enclose the new snapshot virtual disk
	name in double quotation marks (" ").

Notes

You can use any combination of alphanumeric characters, underscore (_), hyphen (-), and pound (#) for the names. Names can have a maximum of 30 characters.

252