Dell 34XX, 38XX, 32XX, 36XX Revive Disk Pool, Revive Physical Disk, Revive diskPool diskPoolName

Revive Disk Pool

Description

This command forces a disk pool and its associated physical disks to the Optimal state.

CAUTION: Correct use of this command depends on the data configuration on all of the physical disks in the disk pool. Do not try to revive a disk pool unless you are supervised by your Technical Support representative.

Syntax

revive diskPool [diskPoolName]

Parameter

Parameter	Description
diskPool	The alphanumeric identifier (including - and _) of
	the disk pool that you want to revive. Enclose the
	diskPoolName in square brackets ([ ]).

Revive Physical Disk

Description

This command forces the specified physical disk to the optimal state.

CAUTION: Correct use of this command depends on the data configuration on all physical disks in the disk group. Never attempt to revive a physical disk unless supervised by a Technical Support representative.

Syntax

revive physicalDisk [enclosureID,slotID]

Parameter

Parameter	Description
physicalDisk	Identifies the enclosure and slot where, the
	physical disk resides. Enclosure ID values are 0 to
	99. Slot ID values are 0 to 31. You must put
	brackets ([ ]) around the enclosure ID value and the
	slot ID value.

268