Dell 36XX, 34XX, 38XX, 32XX manual Create RAID Virtual Disk On a Disk Pool, SecurityType

Parameter	Description
securityType	The setting to specify the security level when
	creating the disk groups and all associated virtual
	disks.
	• none—The disk group and virtual disks are not
	secure.
	• capable—The disk group and virtual disks are
	capable of having security set, but security has
	not been enabled.
	• enabled—The disk group and virtual disks have
	security enabled.
	For information about securityType, see
	Security Type.
dataAssurance	The setting to specify that a disk pool has data
	assurance protection to make sure that the data
	maintains its integrity. When you use this
	parameter, only protected physical disks can be
	used for the disk pool.
	These settings are valid:
	• none – The disk pool does not have data
	assurance protection.
	• enabled – The disk pool has data assurance
	protection. The disk pool supports protected
	information and is formatted with protection
	information enabled.
	The default value is none.
drawerLossProtect	The setting to enforce drawer loss protection
	when you create the replicated repository virtual
	disk. To enforce drawer loss protection, set this
	parameter to TRUE. The default value is FALSE.
enclosureLossProtect	The setting to enforce enclosure loss protection
	when you create the repository. To enforce
	enclosure loss protection, set this parameter to
	TRUE. The default value is FALSE.

Create RAID Virtual Disk On A Disk Pool

Description

This command creates a new RAID virtual disk on an existing disk pool.

Syntax

create virtualDisk diskPool="diskPoolName" userLabel="virtual diskName" capacity=virtualDiskCapacity [thinProvisioned=(TRUE FALSE)] [owner=(01)] [mapping=(nonedefault)] [dataAssurance=(noneenabled)] [(existingRepositoryLabel=existingRepositoryName [newRepositoryCapacity=newRepositoryCapacityValue (KB MB GB TB Bytes))]

179