Dell 32XX Show Virtual Disk Action Progress, Show virtualDisk virtualDiskName actionProgress

Syntax

show (allVirtualDisks virtualDisk [virtualDiskName] virtualDisks [virtualDiskName1 ...virtualDiskNameN]) summary

Parameters

Parameter	Description
allvirtualDisks	The setting to return information about all of the
	virtual disks in the storage array.
virtualDisk or virtualDisks	The name of the specific virtual disk for which you
	are retrieving information. You can enter more
	than one virtual disk name. Enclose the virtual disk
	name in square brackets ([ ]). If the virtual disk
	name has special characters, you also must
	enclose the virtual disk name in double quotation
	marks (“ ”).
summary	The setting to return a concise list of information
	about the virtual disks.

Notes

For snapshot virtual disk copies, the show virtualDisk command returns information about the schedules for the snapshot virtual disk copies. The schedule information is in this form:

Schedule State: "Active" "Disabled" "Completed"

Last Run Time: <mm/dd/yyyy> <hh:mm a.m. p.m.>

Next Run Time: <mm/dd/yyyy> <hh:mm a.m. p.m.>

Start Date: <mm/dd/yyyy> End Date: <mm/dd/yyyy> "No End Date" End Date:

Days of Week: <Sunday - Saturday>, <Sunday - Saturday>, ….

Times for snapshot recreate: <hh:mm a.m. p.m.>, <hh:mm a.m. p.m.>

Show Virtual Disk Action Progress

Description

For a long-running operation that is currently running on a virtual disk, this command returns information about the virtual disk action and amount of the long-running operation completed. The completed amount of the long-running operation is shown as a percentage (for example, 25 means that 25 percent of the long-running operation is completed).

Syntax

show virtualDisk ["virtualDiskName"] actionProgress

374