Dell 38XX, 34XX, 32XX, 36XX manual Set Snapshot Virtual Disk Media Scan, Description

Parameter	Description
timeZone	Specifies the time zone to use for the scheduling
	operations, using one of the following values:
	• GMT±HH:MM—The offset from Greenwich Mean
	Time (GMT), in hours and minutes. For
	example, GMT-06:00 must be used to specify
	Central Standard Time (CST).
	• Text string—A standard time zone text
	string, in quotation marks. For example, "USA/
	Chicago" or "Germany/Berlin". Time zone text
	strings are case sensitive. If you enter an
	incorrect text string, the default time zone is
	GMT.

Examples of code string for defining a schedule:

enableSchedule=true schedule startTime=14:27

enableSchedule=true schedule scheduleInterval=180

enableSchedule=true schedule timeZone=GMT-06:00

enableSchedule=true schedule timeZone="USA/Chicago"

NOTE: If you also use the scheduleInterval option, the firmware chooses between the timesPerDay option and the scheduleInterval option by selecting the lowest value of the two options. The firmware calculates an integer value for the scheduleInterval option by dividing 1440 by the scheduleInterval option value that you set. For example, 1440/180 = 8. The firmware then compares the timesPerDay integer value with the calculated scheduleInterval integer value and uses the smaller value.

NOTE: To remove a schedule, use the delete virtualDisk command with the schedule parameter. The delete virtualDisk command with the schedule parameter deletes only the schedule, not the snapshot virtual disk.

Set Snapshot Virtual Disk Media Scan

Description

This command runs a media scan on the physical disks used for a snapshot virtual disk. You also can perform a consistency check on the data.

Syntax

set snapVirtualDisk ["snapVirtualDiskName"] mediaScanEnabled=(TRUE FALSE) [consistencyCheckEnabled=(TRUE FALSE)]

Parameters

Parameter	Description
snapVirtualDisk	The alphanumeric identifier (including - and _) of
	the snapshot virtual disk for which you are setting

317