Dell 38XX, 34XX, 32XX, 36XX manual Clear Physical Disk Port Statistics

Parameter	Description
	special characters, you must also put quotation
	marks (" ") around the virtual disk name.
consistencyErrorFile	Name of the file in which to save the consistency
	error information. You must put quotation marks
	(" ") around the file name.
mediaErrorFile	Name of the file in which to save the media error
	information. You must put quotation marks (" ")
	around the file name.
priority	Specifies the priority that the consistency check
	has relative to host I/O activity. Valid entries are
	highest, high, medium, low, or lowest.
startingLBA	The starting logical block address. Use integer
	values.
endingLBA	The ending logical block address. Use integer
	values.
verbose	Captures progress details, such as percent
	complete, and shows the information while virtual
	disk consistency is being repaired. To capture
	progress details, set this parameter to TRUE. To
	prevent capturing progress details, set this
	parameter to FALSE.

NOTE: The starting logical block address and the ending logical block address are useful for very large single-virtual disk LUNs. Running a virtual disk consistency check on a very large single-virtual disk LUN can take a long time. By defining the beginning address and ending address of the data blocks, you can reduce the time that a virtual disk consistency check takes to complete.

Clear Physical Disk Port Statistics

Description

This command resets the statistics for all physical disk ports.

Syntax

clear allPhysicalDiskChannels stats

Parameters

None.

149