Dell 38XX Create Host Group, HostType, Use the show storageArray hostTypeTable command to

•export storageArray securityKey

•import storageArray securityKey

•set storageArray securityKey

•start secureErase (physicalDisk physicalDisks)

Create Host

Description

This command creates a new host. If you do not specify a host group in which to create the new host, the new host is created in the default group.

Syntax

create host userLabel=”hostName” [hostGroup=(“hostGroupName” defaultGroup)] [hostType=(hostTypeIndexLabel hostTypeIndexNumber)]

Parameters

Parameter	Description
userLabel	The name that you want to give the host that you are creating.
	Enclose the host name in double quotation marks (“ ”).
hostGroup	The name of the host group in which you want to create a new
	host. Enclose the host group name in double quotation marks
	(“ ”). (If a host group does not exist, you can create a new host
	group by using the create hostGroup command.) The
	defaultGroup option is the host group that contains the host to
	which the virtual disk is mapped.
hostType	The index label or the index number that identifies the host type.
	Use the show storageArray hostTypeTable command to
	generate a list of available host type identifiers. If the host type
	has special characters, enclose the host type in double quotation
	marks (“ ”).

NOTE: You can use any combination of alphanumeric characters, hyphens, and underscores for the names. Command names can have a maximum of 30 characters. If you exceed the maximum character limit, replace square brackets ([ ]) with angle brackets (< >) to overcome this limitation.

Create Host Group

Description

This command creates a new host group.

Syntax

create hostGroup userLabel="hostGroupName"

169