Dell 32XX, 34XX, 38XX, 36XX Increase Virtual Disk Capacity On a Disk Pool, AsyncRemoteReplication

The two virtual disks comprising a remote replicated pair function as a single entity. Establishing a remote replicated pair allows you to perform actions on the entire replicated pair versus the two individual virtual disks.

Syntax

establish asyncRemoteReplication virtualDisk="secondaryVirtualDiskName" asyncRemoteReplicationGroup="asyncRemoteReplicationGroupName" primaryVirtualDisk="primayVirtualDiskName"

Parameters

Parameter	Description
asyncRemoteReplication	The name of an existing virtual disk on the remote
	storage array that you want to use for the
	secondary virtual disk. Enclose the virtual disk
	name in double quotation marks (" ").
asyncRemoteReplicationGroup	The name of an existing remote replication group
	that you want to use to contain the remote
	replicated pair. Enclose the remote replication
	group name in double quotation marks (" ").
primaryVirtualDisk	The name of an existing virtual disk on the local
	storage array that you want to use for the primary
	virtual disk. Enclose the virtual disk name in double
	quotation marks (" ").

Notes

A remote replicated pair is comprised of two virtual disks, a primary virtual disk and a secondary virtual disk, that contain identical copies of the same data. The replicated pair is a part of a remote replication group, which allows the replicated pair to synchronize at the same time as any other replicated pairs within the remote replication group.

You can use any combination of alphanumeric characters, hyphens, and underscores for the names. Names can have a maximum of 30 characters.

When you choose the primary virtual disk and the secondary virtual disk, the secondary virtual disk must be of equal or greater size than the primary virtual disk. The RAID level of the secondary virtual disk does not have to be the same as the primary virtual disk.

Increase Virtual Disk Capacity On A Disk Pool

Description

This command defines the properties for a virtual disk. You can use most parameters to define properties for one or more virtual disks. You also can use some parameters to define properties for only one virtual disk. The syntax definitions are separated to show which parameters apply to several virtual disks and which apply to only one virtual disk. The syntax for virtual disk mapping is listed separately.

230