Dell 36XX Set Host Group, Set Host Port, Set hostGroup hostGroupName userLabel=newHostGroupName

Set Host Group

Description

This command renames a host group.

Syntax

set hostGroup [hostGroupName] userLabel="newHostGroupName"

Parameters

Parameter	Description
hostGroup	Name of the host group to rename. You must put
	brackets ([ ]) around the host group name. If the
	host group name has special characters, you must
	also put quotation marks (" ") around the host
	group name.
userLabel	New name for the host group. You must put
	quotation marks (" ") around the host group name.

NOTE: You can use any combination of alphanumeric characters, hyphens, and underscores for the names. Command names can have a maximum of 30 characters. If you exceed the maximum character limit, replace square brackets ([ ]) with angle brackets (< >) to overcome this limitation.

Set Host Port

Description

This command changes the host type for an HBA host port. You can also change an HBA host port label with this command.

Syntax

set hostPort [portLabel] host=“hostName” userLabel=“newPortLabel”

Parameters

Parameter	Description
hostPort	The name of the HBA host port for which you want
	to change the host type, or for which you want to
	create a new name. Enclose the HBA host port
	name in square brackets ([ ]). If the HBA host port

295