Dell 34XX, 38XX, 32XX, 36XX manual VirtualDisk, AsyncRemoteReplicationGroup, RemotePassword

Parameters

Parameter	Description
virtualDisk	The name of the primary virtual disk that you want
	to add to the remote replication group. Enclose
	the virtual disk name in double quotation marks ("
	").
asyncRemoteReplicationGroup	The name of the remote replication group that will
	contain the member virtual disk that you want to
	add. Enclose the remote replication group name in
	double quotation marks (" ").
remotePassword	This parameter is optional. Use this parameter
	when the remote storage array is password
	protected. Enclose the password in double
	quotation marks (" ").
repositoryVirtualDisk	The name of the repository virtual disk that will
	contain the remote replication group.
	You have two options for defining the name of a
	repository virtual disk:
	• Use an existing repository virtual disk name.
	• Create a new repository virtual disk when you
	run this command.
	The name of an existing repository virtual disk is
	comprised of two parts:
	• The term repos.
	• A four digit numerical identifier that you assign
	to the repository virtual disk name.
	Enclose the name of the existing repository virtual
	disk in double quotation marks (" ").
	If you want to create a new repository virtual disk
	when you run this command you must enter the
	name of either a disk group or a disk pool in which
	you want the repository virtual disk. Optionally, you
	also can define the capacity of the repository
	virtual disk. If you want to define the capacity you
	can use these values:
	• An integer value that represents a percentage
	of the base virtual disk capacity.
	• A decimal fraction value that represents a
	percentage of the base virtual disk capacity.
	• A specific size for the repository virtual disk.
	Size is defined in units of bytes, KB, MB, GB, or
	TB.
	If you do not use the capacity option, the MD
	storage management software sets the capacity to
	20 percent of the base virtual disk capacity.

140