TP-Link TL-WA5110G manual Reboot, Password

5.9.6 Reboot

This page allows you to reboot the AP on the screen below (Figure 5-30).

Figure 5-30 Reboot the AP

Click Reboot to reboot the AP.

Some settings of the AP will take effect only after rebooting, which include:

•Change LAN IP Address. (System will reboot automatically)

•Upgrade the firmware of the AP (system will reboot automatically).

•Restore the AP's settings to factory default (system will reboot automatically).

•DHCP service function.

•Static address assignment of DHCP server.

5.9.7 Password

This page allows you to change the factory default user name and password of the AP on the screen below (Figure 5-31).

Figure 5-31 Password

It is strongly recommended that you change the factory default user name and password of the AP to more secure ones because they control access to the AP’s web-based utility. All users who try to access the AP's web-based utility or Quick Setup will be prompted for the AP's user name and password.

)Note:

The new user name and password must not exceed 14 characters in length and must not include any space. Enter the new Password twice to confirm it.

84