4Drop/Non-drop display (for NTSC only)
Displays the framing mode of the time code.
NDF | : |
DF | : Drop frame |
PAL | : Displays when PB/DV IN in the SYSTEM (2/2) |
| Menu screen is set to PAL. |
5Time code mode display
Displays the time code mode set in the TC/UB/CLOCK Menu screen.
REGN : Regeneration mode
RRUN : REC RUN preset mode
FREE : FREE RUN preset mode
EXT : This is displayed when time codes are input to the TIME CODE IN terminal (with TCG SOURCE set to EXTERNAL).
It blinks when no time code is input or when the phase of an external time code is not locked with the phase of the video signal.
DUPL : This is displayed when TC DUPLICATE is set to AUTO or NON DROP.
(Enter the time code of the DV terminal.)
6Counter mode
The counter mode selected with the COUNTER switch on the front panel is displayed.
CTL : CTL counter | TC : Time code |
UB : User’s bit |
|
7Counter display
•The CTL counter is displayed as a
8VCR mode display
Displays the operation mode of the VCR.
The reservation of mode is displayed in blinking light. NOCAS (no cassette tape), EJECT, STBON (standby- on), STBOF
9VCR mode graphic display
c: Eject L : Stop : : Play J : Still
Z : FF/Forward search
+ : REW/ Reverse search:
a : Record
aJ : Recording pause
: Audio dubbing
J: Audio dubbing pause
0Tape symbol display
:This symbol is displayed when a cassette tape is loaded.
It blinks during loading or ejecting of a cassette tape.
If the rear switch of the cassette tape is set to SAVE, it is displayed in yellow.
!Remaining tape time display
Displays the remaining time (minutes). Blinks if the re- maining time is less than 4 minutes.
Not displayed when the remaining time is being con- firmed. SP will not be displayed when a DVCAM cas- sette tape is being played back.
@Time/Date display
The data of the
If the date/time is not set up, “– –
#Input video signal display
Displays the input video signal selected with the INPUT SELECT switch on the front panel.
Blinks if the selected signal is not input (LINE, Y/C, CPNT, or DV).
( LINE , Y/C , CPNT , DV )
In the case of a
SYNC : It is displayed when signals are input via the SYNC IN terminal with EXTERNAL SYNC selected.
$Editing mode display
The editing mode selected with the editing remote con- troller is displayed.
(ASSEM, INSV, INSA, INSVA, INS TC, INS VA12, INS VA34, INS A12, INS A34)
%Timer display
r: It is displayed when the TIMER switch on the rear
panel is set to REC or PLAY.
REC: RED | PLAY: GREEN |
^Wide screen ID signal display
W: It will be displayed when a wide screen ID signal exists in the input signal of the Y/C or DV terminal. The data on the tape is displayed during playback.
&Condensation display
:It is displayed when condensation occurs.
*Option display
It is displayed when an option board is connected. |
XLI : |
XLO : |
: |
27
