29.The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
Unpacking
When unpacking, check to make sure all parts are included. Refer to the Assembly Diagrams and Parts Lists at the end of this manual. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible.
Installation
1.Mount the Fairlead (2) to the Mounting Frame
(1)using supplied bolts, nuts, and wash-
ers.
2.Mount Electric Winch to the Mounting Frame
(1)using Bolt (3) and Nut (6). See illustration to the right.
3.Connect the Solenoid Output Power Lines
4.There are two options for mounting the so- lenoid:
Winch 
Mounting Frame (1)
Fairlead (2) 
Mounting Option 1: Mounting the Solenoid to the Mounting Frame (1)
Mount the Solenoid Assembly (34) to the Mounting Frame (1) using the three Flat Washers (20s), three Spring Washers (21s), and three Nuts (22s) as shown below, right. Securely tighten nuts.
Sol e n oi dAs s e mbl y
Motor
Terminal
Solenoid
Cable
SKUs 40764, 93752, | For technical questions, please call | Page 5 |
& 91905 |
|
|
