Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1.Observe work area conditions. Do not use machines or power tools in damp or wet locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically powered tools in the presence of flammable gases or liquids.
2.Keep children away. Children must never be allowed in the work area. Do not let them handle machines, tools, or extension cords.
3.Do not force tool. It will do the job better and more safely at the rate for which it was intended. Do not use inappropriate attachments in an attempt to exceed the tool capac- ity.
4.Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool. Do not use a tool for a purpose for which it was not intended. Do not use this item for aircraft purposes. Do not exceed winch load weight capacity for your model (see Specifications on page 2).
5.Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically nonconductive clothes and nonskid footwear are recom- mended when working. Wear restrictive hair covering to contain long hair.
6.Use eye protection. Always wear
7.Do not overreach. Keep proper footing and balance at all times. Do not reach over or across running machines. Do not cross over or under cable under load.
8.Maintain tools with care. Keep equipment clean for better and safer performance. Follow instructions for lubricating and changing accessories. Inspect cords periodically and, if damaged, have them repaired by an authorized technician. The hook must be kept clean, dry, and free from oil and grease at all times.
9.Remove adjusting keys and wrenches. Check that keys and adjusting wrenches are removed from the tool or machine work surface before operating.
10.Avoid unintentional starting. Remove the Switch Ass’y (35) when not in use.
11.Stay alert. Watch what you are doing, use common sense. Do not operate any equip- ment when you are tired.
12.Check for damaged parts. Before using any tool, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its
SKUs 40764, 93752, | For technical questions, please call | Page 3 |
& 91905 |
|
|
