JVC BR-DV6000U specs

OTHERS

– Warning display – (continued)

Warning display (Displayed regardless of the DISPLAY mode)

When a warning display appears, BR-DV6000 stops operation and ceases to accept any operation command. When TAPE DEFECTIVE (5605 - 5609) is displayed, the unit similarly stops all opera- tions except EJECT operation.

Display	Status	Action
WARNING 0201	Condensation.	Leave the power on and wait for the
CONDENSATION		display to disappear.
ON DRUM
WARNING 3200	Unable to load tape.	This error can be resolved by turning
LOADING		off and then on the power. However,
FAILURE		doing so may damage the tape in some
WARNING 3300	Unable to eject tape.	cases. Consult your JVC authorized
UNLOADING		dealer.
FAILURE
WARNING 4100	Eject error.
CASSETTE
EJECT FAILURE
DEFECTIVE	Broken tape.	Press the EJECT button to remove and
TAPE!		replace the tape.
5605 - 5609
WARNING 5702	Tape-end sensor error.	This error can be resolved by turning
TAPE END DET.		off and then off the power. However,
ERROR!		doing so may damage the tape in some
WARNING 5802	Tape-begining sensor error.	cases. Consult your JVC authorized
TAPE BEGIN		dealer.
DET. ERROR!
WARNING 7001	Drum rotation error.
DRUM MOTOR
FAILURE
WARNING 7101	Capstan rotation error.
CAP MOTOR
FAILURE
WARNING7202 -	Supply reel rotation error.
7203
SUPPLY REEL
FAILURE
WARNING7302 -	Take up reel rotation error.
7303
TAKE UP REEL
FAILURE
WARNING7305	Tape winding error during unloading.
TAKE UP REEL
FAILURE
WARNING 7401	Reel motor rotation error.
REEL MOTOR
FAILURE

Memo

This unit uses a microcomputer. It may not function correctly if there is external noise. If this happens, please turn off the power and then on again.

98

Image 98

JVC BR-DV6000U instruction manual Warning display Displayed regardless of the Display mode

Contents

DV Video Cassette Recorder LLT0033-001C-H S3125A Remarque Reorient or relocate the receiving antenna Compatible mechanisms for standard/mini DV cas- sette tapes Backup recording functionDV format Sync in terminal Table of Contents Place of storage and use IntroductionRemarks of usage Handling the unit Head cleaning Regular maintenance Regular maintenance Maintenance consultation Memo Cleaning tapeCassette tape Remarks on the use of tape It is used at a place of high humidity CondensationOver 10 years Head drum Videotape Cassette loading slot/LED Names and Functions of PartsFront panel Operate button/LED FF button/LED Play button/LED Pause button/LED Stop button Switching is invalid during recording 4REMOTE/LOCAL switch Input Select switchAudio Output switch Memo The following information is also dis- played Audio Monitor switchCounter switch CH2/4 Reset button@PHONES Headphone volume Menu button Special functions/Setting buttons Video Y/C in terminal 4-PIN Rear panelVideo Line in terminal BNC Video Line OUT terminal BNC Time Code OUT terminal BNC Sync in synchronization input Terminal BNCTime Code in terminal BNC CH1/3 Audio in terminal RCA Signal GND terminal DC power input terminal 2-PIN Timer recording/playbackSwitch DC power cord clamp Mini jack › Remote 2 JVC Bus terminal 12-PIN ¤ Serial Remote OUT terminal mini jack‹ Remote 1 RS-422A terminal Slot cover for an optional board On-screen display Description Operation ON-SCREEN DisplayOn-screen display Sampling frequency/audio Status displayMemo Output CH Counter display 00 00 00 Display Description Insert editing in the 32 k audio modeStatus/Event display Display displayed during operation Alarm display Blank DUB Inhibit DUB InhibitREC TAB Dvcam Edit Inhibit LCD LCD display mode enlarged displayLCD display It is displayed when condensation occurs Displays the framing mode of the time codeDisplays the operation mode of the VCR Non-drop frame Input signal Connecting video signals Output signal Connection Playback Synchronization signalYes Record Headphone terminal Connecting audio signalsAudio Output switches and output channels Microphone input terminal Connecting to a monitor TVDigital output Digital input Remote extension cable Connecting to editing sytem Related VCRs DV cable When an RS-422A-compatible remote controller is used Connection Connection with serial remote terminals Dubbing with 1 VCR Alarm message Connecting the AC adapterDC in terminal Timer switch Connect the supplied AC adaptor to BR-DV6000 Turning on/off the power Turning on the powerTurning off the power Preparation Remote controller and operation lock mode Selecting the operating method main unit/remote controllerOperation Lock mode Operation method main unit Loading/Ejecting cassette Loading the cassette tapeEjecting the cassette tape Setting the display time of the LCD display Setting the LCD displayAdjusting the LCD display Selecting the LCD status display Setting the date and time in the Clock Adjust Menu screen Setting date and timeSetting/Displaying date and time Display 2/2 Menu screen Selecting date/time displayOn-screen status display Setting Recording Recording index signals Recording procedure Press the Pause button while holding down the A.DUB button Audio dubbingPress the Play button to play the tape Press the Play button Minute tape RECORDING- Backup recording function For using GY-DV5000 as the source unit 115MIN Minute tape 175MIN 265MIN BR-DV6000 Serial remote controller RM-G30, sold separately can be conRecording Recording with serial remote terminals Output from the Serial Remote OUT terminal. Only with Oper Set the time, etc., of the external timer External timer recordingAdjust the recording level of sound LCD display System Menu screen Setting the switches on the front panelPlayback Video Menu Fast forward/rewind Basic playback procedurePlayback of tapes recorded in the PAL format Special playback functions Search modeFrame-advance playback Search speed REW button Increasing the playback speed by 7%Decreasing the playback speed by 10% Search function Index searchBlank search In the Stop mode, press the Blank button Repeat operation Repeat Mode in the System 1/2 Menu screenRepeat playback Index repeat playback Clearing registered cue-up points For details on time code setting and recordingRegistering cue-up points Multi cue-up Searching cue-up points Changing cue-up pointsExiting the Multi Cue-up screen Set up the time, etc., of the external timer External timer playbackMode, the timer symbol lights up in green Connect the supplied AC adapter BR-DV6000 Dubbing machine Time Code Displaying the time code Presetting the time code TCG Source Internal TCG Select Preset Recording from preset dataPreset time code Recording the time code TCG Source TCG ModeRecording time code, input to the DV IN/OUT terminal TCG Select TC/UB/CLOCK1/2 Menu screen Front switchesRecord time codes from an external time code generator Set TCG Source to Òexternaló Playing back the time code Set the Counter switch to Òtcó or ÒubóPress the Play button to go to the Playback mode Monitor / LCD Status display KHz mode Edit Editing with an RS-422A/JVC bus edit remote controllerEdit mode Analog editing Mode select Yes*2 AUD-1 Following editing mode is not availableEdit mode DV editing Mode select AUD-2 AUD-1 Remote 2/2 Menu screen Editing procedure with BR-DV6000 Remote 1/2 Menu screen To edit with DV connection Making prerecorded base tape used as editing recorder Setting the Time Code mode used as editing recorder Setting of RM-G820 Confirmation by preview editing Edit Using a non-linear editing systemRemote FF/REW Mode Controller Type in the Remote 2/2 Menu screen Menu Screens Structure of the Menu screens Displaying the Menu screen items for setting Setting the menus Set BR-DV6000 to the Stop or Still mode TOP Menu screen System 2/2 Menu screen Description of the Menu screens TOP Menu screenSystem Menu screens System 1/2 menu 55MIN Backup REC25MIN 75MIN Menu Screens Description of the Menu screens System 2/2 Menu Remote Menu screens Remote 1/2 Menu screen Remote 2/2 Menu screen Synchroni DelayPB Start Zation Audio Menu screen Video Menu screen TC/UB/CLOCK Menu screens TC/UB/CLOCK 1/2 Menu screen BIT PAL Adjust TC/UB/CLOCK 2/2 Menu screen Date REC Display Menu screens Display 1/2 Menu screen Display 2/2 Menu screen Command tables RS-232C Interface 9PIN D-Sub Pin No RS-232C specificationsAscii code table RxD RS-232C commands Preparation Command Description Return commands from the VCR Error commands Example of Clear Error RS-232C Interface RS-232C commands Second byte Setup preset commands First byte Bit No Status If the bit is Third byte Example Check the Sync Select setting Menu switch setup commandED Memory SW Preset B/J1 Example Set Sync Select to External Menu System MenusD1/D2 Set value Corresponding bit values D1/D2 Remote Menus Menu Set value TC/UB/CLOCK Menus Audio Menus Video Menus 12H 24H Display MenusMAX5 Alarm display Displayed regardless of the Display mode Others Warning display Displayed regardless of the Display mode Troubleshooting ¥ The System 1/2 Menu screen is displayed Set BR-DV6000 to the Stop modeChecking the hour meter Press the Menu button to return to the normal screen RS-232C interface board SA-K46U XLR in board SA-X61U Installing SA-X61U or SA-X62UOptional devices XLR OUT board SA-X62U Hexagonal screws Installing SA-K46U RS-232C interface boardInstall the SA-K46U Remove the RS-422A Remote 1 terminal Specifications External dimensions Unit mm 212 Supplement AC adapter section Victor Company of JAPAN, Limited