JVC BR-DV6000U CH2/4, Menu button, Phones terminal, Reset button, @PHONES Headphone volume

NAMES AND FUNCTIONS OF PARTS

– Front panel – (continued)

		$ % * ^			&
									OPERATE
	Mini	MENU	DISP	RESET	PROFESSIONAL	A.DUB		REC	PLAY		PAUSE
		SEARCH–	SET	SEARCH+
						EJECT		REW	STOP		FF
#	MIC	HOLD	BLANK	CUE UP
		PHONES	REC LEVEL					AUDIO		INPUT	REMOTE
						COUNTER MONITOR OUTPUT				SELECT
						CTL	L	CH-1/2		DV
						TC	MIX	MIX	LINE
			CH-1/3	CH-2/4	BR-DV6000	UB	R	CH-3/4		Y/C	LOCAL
									(CPN)

!@ 0

0[REC LEVEL] Volume for audio		$[HOLD] button
recording level for CH1/3 and		If this button is pressed in the LCD enlarged
CH2/4		display mode, the time code preset screen will
Use the switch to adjust the audio recording level		be displayed on the LCD. When the time code
		preset screen is displayed, press this button to
for CH1 and CH2.
		return to the normal display.
During audio dubbing, the audio recording level
		(☞ Page 59 “Presetting time code”)
for CH3 and CH4 can be adjusted with this
		%[MENU] button
switch.
		If this button is pressed when BR-DV6000 is in
	Memo
		the STOP/STILL mode or when no cassette is
● During DV input, the volume control is not
	effective.	loaded, the menu is displayed on the LCD or
● During MIC input, only the volume for CH1/3		the monitor connected to the VIDEO MONITOR
		OUT terminal.
	REC LEVEL is valid.
		When the menu is displayed, press this button
![PHONES] terminal		to return to the normal display.
This is the mini jack terminal for connecting to		(☞ Page 70 “Setting the menu”)
		^[RESET] button
the headphone. (Stereo ø3.5)
• When BR-DV6000 plays back tapes recorded		• To reset the CTL counter display to “00”, press
	in the 32 kHz mode, the audio channel for	this button.
	outputting from this terminal is selected with	• If this button is pressed when the time code
	the 6 AUDIO OUTPUT switch.
		preset screen is displayed, all the digits of
@[PHONES] Headphone volume
		the time code or the user’s bit are reset to
Use this switch to adjust the output level of the		“00”.
PHONES terminal.		• When the Multi Cue-up screen is displayed,
Both channels are adjusted at the same time.		press this button to clear the registered cue-
#[MIC] terminal		up points.
This is the mini jack terminal for monaural mi-		&[CUE UP] button
crophone input.		When the 8 COUNTER switch is set to TC,
To input sound from a microphone, set the [IN-		press this button to display the Multi Cue-up
PUT SELECT] switch to LINE or Y/C (CPN).		screen on the monitor or LCD.
If a microphone is connected, sound for the AU-		When the Multi-Cue-up screen is displayed,
DIO IN terminal located on the rear panel can-		press this button to start searching the selected
not be input.		tape position.
The sound of the microphone is recorded to		(☞ Page 54 “Multi Cue-up”)
CH1/CH2 in the recording mode and CH3/CH4
in the audio-dubbing mode.

14