Table | Command | Description |
|
|
|
J1 | B0 | VISS FORWARD : |
|
| Index search in the forward direction. |
|
| For the index search position, enter a |
|
| |
|
| command. |
|
| When a |
|
| tered, index search starts. |
|
| If ENTER (40H) is transmitted before |
|
| all three digits are entered, the remain- |
|
| ing digit(s) are considered as Ò0Ó (30H), |
|
| and index search starts. |
J1 | B1 | VISS REV : |
|
| Index search in the reverse direction. |
|
| For the index search position, enter a |
|
| |
|
| command. |
|
| When a |
|
| tered, index search starts. |
|
| If ENTER (40H) is transmitted before |
|
| all three digits are entered, the remain- |
|
| ing digit(s) are considered as Ò0Ó (30H), |
|
| and index search starts. |
B | B2 | CUE UP WITH DATA : |
|
| Use this command to cue up a speci- |
|
| fied point on the tape. When the tape |
|
| is cued, COMPLETION is returned |
|
| and the Pause mode becomes effec- |
|
| tive. |
|
| To specify a cue point, transmit the |
|
| time data (hour: minute: second: frame, |
|
| a total of 8 bytes with 2 bytes for each) |
|
| following this command. By transmit- |
|
| ting ENTER (40H) with the time data, |
|
| transmission of lower data becomes |
|
| unnecessary. In such a case, Ò0Ó is |
|
| transmitted. If the specified point can- |
|
| not be found, NOT TARGET (05H) is |
|
| returned. |
J1 | B2 | CUE UP AND PLAY WITH DATA: |
|
| Use this command to cue up a speci- |
|
| fied point on the tape. When the tape |
|
| is cued, COMPLETION is returned |
|
| and the Play mode becomes effective. |
|
| To specify a cue point, transmit the |
|
| time data (hour: minute: second: frame, |
|
| a total of 8 bytes with 2 bytes for each) |
|
| following this command. By transmit- |
|
| ting ENTER (40H) with the time data, |
|
| transmission of lower data becomes |
|
| unnecessary. In such a case, Ò0Ó is |
|
| transmitted. If the specified point can- |
|
| not be found, NOT TARGET (05H) is |
|
| returned. |
|
|
|
|
|
|
Table | Command | Description | ||
J1 | B5 |
|
|
|
|
| Shuttle play. The search speed is | ||
|
| specified by sending the speed code | ||
|
| data after this command (see the ta- | ||
|
| ble below). |
|
|
|
| Speed code table | ||
|
| (Supported speed only) | ||
|
|
|
|
|
|
| Speed code | Search speed |
|
|
| 30h | STILL |
|
|
| 31h | 0.1 |
|
|
| 32h | 0.2 |
|
|
| 33h | 0.33 |
|
|
| 34h | 0.5 |
|
|
|
|
|
|
|
| 35h | 1 |
|
|
| 36h | 2 |
|
|
| 37h | 5 |
|
|
| 38h | 10 |
|
|
| 39h | 20 |
|
|
| 3Bh | X0.90 |
|
|
| 3Ch | X1.07 |
|
|
| 3Bh and 3Ch are effective only for B5. | ||
| B6 |
|
| |
|
| Shuttle reverse play.The search speed | ||
|
| is specified by sending the speed code | ||
|
| data after this command (see the ta- | ||
|
| ble above). |
|
|
B | CO | AUTO EDIT KEY : |
|
|
|
| Audio editing with the VCR. | ||
¥It is required that the editing chan- nel is selected in [E5: Edit Preset].
¥This audio editing command must be used with [FA: Rec Request].
¥Preroll time can be set with [E6: Preroll Time Preset]. Without this setting, the VCR menu switch set- tings are followed.
¥Upon the completion of auto editing,
the VCR returns [01: Complete].
BC1 PREVIEW KEY : Preview with the VCR
¥It is required that the editing chan- nel is selected in [E5: Edit Preset].
¥This preview command must be used with [FA: Rec Request].
¥Preroll time can be set with [E6: Preroll Time Preset]. Without this setting, the VCR menu switch set- tings are followed.
¥Upon the completion of preview, the VCR returns [01: Complete].
87
