ProSafe VPN Firewall 200 FVX538 Reference Manual
Virtual Private Networking 5-41
v1.0, August 2006
10. Click Apply. The new policy will appear in the IKE Policies Table (a sample policy is shown
below)
Configuring the ProSafe VPN Client for ModeConfig
From a client PC running NETGEAR ProSafe VPN Client software, configure the remote VPN
client connection.
To configure the client PC:
1. Right-click the VPN client icon in the Windows toolbar. In the upper left of the Policy Editor
window, click the New Policy editor icon.
a. Give the connection a descriptive name such as “modecfg_test” (this name will only be
used internally).
Figure 5-30