ProSafe VPN Firewall 200 FVX538 Reference Manual
•IPSec Host. If you want authentication by the remote gateway, enter a User Name and Password to be associated with this IKE policy. If this option is chosen, the remote gateway must specify the user name and password used for authenticating this gateway.
Note: If a
Configuring XAUTH for VPN Clients
Once the XAUTH has been enabled, you must establish user accounts on the Local Database to be authenticated against XAUTH, or you must enable a
Note: If you are modifying an existing IKE Policy to add XAUTH, if it is in use by a VPN Policy, the VPN policy must be disabled before you can modify the IKE Policy.
To enable and configure XAUTH:
1.Select VPN from the main menu and Policies from the submenu. The IKE Policies screen will display.
2.You can add XAUTH to an existing IKE Policy by clicking Edit adjacent to the policy to be modified or you can create a new IKE Policy incorporating XAUTH by clicking Add.
3.In the Extended Authentication section check the Edge Device radio box to use this router as a VPN concentrator where one or more gateway tunnels terminate. You then must specify the authentication type to be used in verifying credentials of the remote VPN gateways. (Either the User Database or RADIUS Client must be configured when XAUTH is enabled.)
4.In the Extended Authentication section, select the Authentication Type from the
•Edge Device to use this router as a VPN concentrator where one or more gateway tunnels terminate. When this option is chosen, you will need to specify the authentication type to be used in verifying credentials of the remote VPN gateways.
–User Database to verify against the router’s user database. Users must be added through the User Database screen (see “User Database Configuration” on page
Virtual Private Networking |
v1.0, August 2006
