ProSafe VPN Firewall 200 FVX538 Reference Manual
4.If your ISP has not assigned any Domain Name Servers (DNS) addresses, select the Get dynamically from ISP radio box. If your ISP has assigned DNS addresses, select the Use these DNS Servers radio box. Ensure that you fill in valid DNS server IP addresses in the fields. Incorrect DNS entries may cause connectivity issues.
Note: Domain Name Servers (DNS) convert Internet names such as www.google.com, www.netgear.com, etc. to Internet addresses called IP addresses. Incorrect settings here will result in connectivity problems.
5.Click Apply to save the settings.
6.Click Reset to discard any changes and revert to the previous settings.
7.Click Test to try and connect to the NETGEAR Web site. If you connect successfully and your settings work, then you may click Logout or go on and configure additional settings.
To configure your WAN2 ISP settings:
1.Select the WAN2 ISP Settings tab. The WAN2 ISP Settings screen will display.
2.Repeat steps 1 through 7 above.
Programming the Traffic Meter (if Desired)
The traffic meter is useful when an ISP charges by traffic volume over a given period of time or if you want to look at traffic types over a period of time.
To enable the traffic meter:
1.From the primary menu, select Monitoring, and then select Traffic Meter from the secondary menu. The WAN1 Traffic Meter screen will display. Fill out the information described in Table
Connecting the FVX538 to the Internet |
v1.0, August 2006
