ENGLISH
When selecting the DC TRIGGER
•To turn on the component connected to the DC TRIGGER OUT jack when this input source is selected, you should set the DC TRIGGER to ON for this input source.
OFF : To turn off the DC trigger function.
ON: To turn it on.
• For details, refer to "CONNECTING DC TRIGGER OUT" on page 9.
When selecting the NAME
•You can give names to the input sources other than tuner.
•Up to 7 characters can be entered for each name.
Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired input source, then
1 press the ENTER button.
Example: When selecting the VIDEO 1
Press the CURSOR UP(▲)/DOWN(▼) buttons to select the NAME, then press the ENTER button.
2
|
| • The first digit flickers. | |
3 | Press the CURSOR LEFT(◀)/ RIGHT(▶) | 4 | Press the CURSOR UP(▲)/DOWN(▼) |
buttons to select the desired digit. | buttons to enter the desired character on | ||
| the flickering digit. | ||
• Then the selected digit will flicker. | • You can enter the desired among blank, A ~ Z, | |
a ~ z, 0 ~ 9, (, ), , +, , , | ||
|
5 | Repeat the above steps ③ and ④ to enter the desired characters on the rest of the digits. | |
6 | Confirm your entry. | • The name is stored in the memory. |
|
| ■To resume its factory input source name. |
|
| • Make a blank on each digit and press the ENTER |
|
| button. |
54
