Memorizing the adjusted channel levels

You can memorize the adjusted channel levels into preset memory("REFERENCE 1", "REFERENCE 2") and recall the memorized whenever you want.

After performing the steps ~in "Adjusting the current channel level" procedure on page

1 62, press the CURSOR UP()/DOWN() buttons to select a channel (, not the MODE (memory mode) and the LFE LEVEL SETUP), then press the ENTER button.

• The "REFERENCE 1" indication flickers.

Press the CURSOR LEFT()/RIGHT() buttons to select the desired preset memory,

2 then press the ENTER button.

• Each time the CURSOR LEFT() or RIGHT() button is pressed, "REFERENCE 1" or "REFERENCE 2" is selected.

• The adjusted channel levels have now been memorized into the selected memory.

Recalling the memorized channel levels

Press the CURSOR UP()/DOWN() buttons to select the MODE(memory mode).

1

• "CALIBRATE" may be displayed instead of "REFERENCE 1" or "REFERENCE 2".

Press the CURSOR LEFT()/ RIGHT() buttons to select the desired one of REFERENCE 1

2 and REFERENCE 2.

• Then the channel levels memorized into the selected preset memory are recalled.

ENGLISH

63

Page 64
Image 64
Sherwood R-871 manual Memorizing the adjusted channel levels, Recalling the memorized channel levels