Sherwood R-871 manual ROOM 2 SOURCE PLAYBACK, English, Adjust the ROOM 2 volume

ENGLISH

ROOM 2 SOURCE PLAYBACK

•This function allows enjoying one source in the main room and playing another in a different room at the same time.

•When you connect the multi-room system kit to the IR IN jack of this receiver, you can control this receiver with not only the universal remote control unit but also the ROOM 2 remote control unit in a different room, too. (For details, refer to "CONNECTING MULTI-ROOM SYSTEM KIT" on page 13 and "ROOM 2 Remote Controls" on page 28.)

■Notes:

•The analog signals from the EXTERNAL INs and the digital signals cannot be output to the different room, meaning no playback in a different room.

•You cannot play the ROOM 2 source in any surround mode.

■When using the buttons on the remote control unit.			■When using the buttons on the front panel.
Press the ROOM 2 button.			1	Press the ROOM 2 button to enter the
1				ROOM 2 mode.
			• ROOM 2 ~ is displayed for several seconds.
			• When the ROOM 2 setting mode disappears,
			press the ROOM 2 button again.
• ROOM 2 ~ is displayed for several seconds.			2
• Each time this button is pressed, the ROOM 2 mode				Select the desired mode while displaying
changes as follows :				the ROOM 2 setting mode.
ON : To turn on the ROOM 2
function. ("	" lights up.)		• Each time these buttons are pressed,
OFF : To turn it off. ("	" or "	"	the mode changes as follows :
goes off depending on the AMP ASSIGN setting.)			ROOM 2 ~		: To turn on or
■Note :			(ROOM 2 mode)		off the ROOM 2
• When the ROOM 2 mode is set to OFF, you cannot					function.
adjust the ROOM 2 volume.			INPUT ~		: To select the desired
			(ROOM 2 input)		ROOM 2 source.

Select the desired input as a ROOM 2 source.

2		VOLUME ~		: To adjust the volume on the power
		(ROOM 2 volume) amplifier assigned to ROOM 2.
• Each time the INPUT button		■Note : When the ROOM 2 mode is set to OFF,
			the ROOM 2 input and the ROOM 2 volume
on the universal remote
			cannot be selected
control unit is pressed, the
ROOM 2 input can be		3	Set the selected mode as
selected among MAIN
			desired.
source, TUNER, CD, AUX,
TAPE, VIDEO 1 ~ VIDEO 5.		■When selecting the ROOM 2 mode.
	Adjust the ROOM 2 volume.
3		ON : To turn on the ROOM 2 function.
		("		" lights up.)
		OFF : To turn it off. ("			" or "	" goes off
		depending on the AMP ASSIGN setting.)
		■When selecting the ROOM 2 input.
		• You can select the desired among MAIN source,
• You can adjust the volume on the power amplifier		TUNER, CD, AUX, TAPE, VIDEO 1 ~ VIDEO 5 as a
		ROOM 2 source.
assigned to ROOM 2 when the SURROUND BACK/		■When selecting the ROOM 2 volume.
ROOM 2 speaker terminals are connected to the		• You can adjust the volume on the power amplifier
speakers in a different room. (For details, refer to "When		assigned to ROOM 2 when the SURROUND BACK/
selecting the AMP ASSIGN" on page 49.)		ROOM 2 speaker terminals are connected to the
• The MUTE button on the ROOM 2 remote control unit can		speakers in a different room. (For details, refer to "When
be available only when the ROOM 2 function is operating.		selecting the AMP ASSIGN" on page 49.)
4	Start play on the component related to the	4	Start play on the component related to the
	ROOM 2 source.		ROOM 2 source.

■Notes:

•When the EXTERNAL IN is selected as a main input, if the MAIN source is selected as a ROOM 2 input, no audio signals can be heard in the different room (ROOM 2).

• Even when this receiver enters the standby mode, in such a case that " " lights up still and the POWER

ON/STANDBY button lights up in blue as it does in the operating mode, meaning only the ROOM 2 circuitry operates, the ROOM 2 source can be played independently.

• When you do not use the ROOM 2 function, turn off the ROOM 2 function to save electricity.

46