SETTING THE SYSTEM SETUP
• AMP ASSIGN : To assign the surround back channel's power amplifier to ROOM 2 for ROOM 2 playbak.
• SUBWOOFER MODE : To select the desired subwoofer mode.
• TONE CONTROL : To adjust the tone (bass and treble) as desired.
• CINEMA EQ : To select the desired cinema EQ mode.
•BACKGROUND : To select the desired background color of the OSD menu.
•MOMENTARY OSD : To turn on or off the OSD that shows the status corresponding to each operation
momentarily.
•OSD POSITION ADJUST : To adjust the positon of the momentary OSD and the OSD menu.
When selecting the items other than OSD POSITION ADJUST
Press the CURSOR UP(▲)/DOWN(▼) buttons to select the desired item.
1
Press the CURSOR LEFT(◀)/RIGHT(▶) buttons to set the selected item as desired.
2
ENGLISH
When selecting the AMP ASSIGN
•You should assign the power amplifier for the surround back/room 2 channels to ROOM 2 when the SURROUND BACK/ROOM 2 speaker terminals are connected to the speakers installed in another room for ROOM 2 playback. In this case, you need not use the power amplifier to drive the speakers additionally. (For details on ROOM 2 connection, refer to "CONNECTING ROOM 2 OUTS" on page 12.)
SURR BACK : To use power amplifier for the surround back channels. (" | " goes off.) | |
ROOM 2 : To use it for ROOM 2 playback. (" | " lights up.) |
|
49
