MAINTENANCE
HOW TO REPLACE
THE MOTION DRIVE BELT
REMOVAL
1.Remove the mower housing. See the instructions on “How To Remove The Mower Housing”.
2.Completely push the pedal forward and engage the parking brake.
3.Remove the idler pulleys (Figure 31).
Idler Pulley |
Motion |
Drive Belt |
Drive Pulley |
Idler Pulley |
Figure 31 |
Shifter |
Bracket |
Shift Link |
Hair |
Pin |
Figure 33 |
8.To remove the motion drive belt from the stack pulley, pull the front end of the belt under the stack pulley and then back between the stack pulley and the steering plate (Figure 34).
FRONT
Stack Pulley | Steering |
| |
| Plate |
Motion | Belt Guides |
| |
Drive |
|
Belt | Figure 34 |
4.To access the belt guides, remove the battery and battery tray. See “How To Remove The Battery”.
5.Loosen the belt guides at the drive pulley (Figure 32).
Seat Spring
Belt Guide | Belt Guide | Figure 32 |
6.Remove the motion drive belt from the drive pulley (Figure 31).
7.Remove the hair pin from the shift link (Figure 33). Pull the motion drive belt over the shifter bracket.
9.Remove the access panel (Figure 35).
10.Remove the two screws that attach the steering shaft assembly (Figure 35). Raise the steering wheel and steering shaft assembly. Pull the motion drive belt under the steering shaft assembly.
Screw |
|
|
Steering Shaft |
|
|
Assembly |
|
|
Motion Drive |
|
|
Belt | Access Panel | Figure 35 |
|
11.Remove the motion drive belt. A correct replacement part or assistance is available from an Authorized Service Center in your area.
30 |
