ProSafe VPN Firewall 200 FVX538 Reference Manual
4-24 Firewall Protection and Content Filtering
v1.0, August 2006
Setting a Schedule to Block or Allow Specific Traffic
If you enabled Content Filtering in the Block Sites menu, or if you defined an outbound or inbound
rule to use a schedule, you can set up a schedule for when blocking occurs or when acc ess is
restricted. The firewall allows you to specify when blocking will be enforced by configuring one
of the Schedules—Schedule 1, Schedule 2 or Schedule 3.
To invoke rules and bl ock keywords or Inte rnet domains based on a schedule:
1. Select Security from the main menu and Schedule from the sub-menu. The Schedule 1 screen
will display.
2. Check the radio button for All Days or Specific Days. If you chose Specific Days, check the
radio button for each day you want the schedule to be in effect.
3. Check the radio button to schedule the time of day: All Day, or Specific Times. If you chose
Specific T imes, enter the Start Time and End Time fields (Hour, Minute, AM/PM), which will
limit access during certain times for the selected days.
4. Click Reset to cancel your settings and revert to the previous settings.
5. Click Apply to save your settings to Schedule 1.
Repeat these 5 steps to set to a schedule for Schedule 2 and Schedule 3.
Figure 4-16