ProSafe VPN Firewall 200 FVX538 Reference Manual
2-2 Connecting the FVX538 to the Internet
v1.0, August 2006
2. When prompted, enter admin for the firewall user name and password for the firewall
password, both in lower case letters. (The firewall user name and password are not the same as
any user name or password you may use to log in to your Internet connection.)
3. Click Login.
Configuring the Internet Connections to Your ISPs
You should first configure your Internet connections to your ISPs on WAN port 1, and then
configure WAN port 2 second.
To automatically configure the WAN ports and connect to the Internet:
1. The WAN1 ISP Settings scre en similar to the one shown in Figure 2-1 should display when
you log in. (If the screen does not display, select the primary menu option Network
Configuration and the sub-menu option WAN Settings.
Note: You might want to enable remote management at this time so that you can log
in remotely in the future to manage the firewall (see “Enabling Remote
Management Access” on page 6-10). If you enable remote management, you
are strongly advised to change your password (see “Changing Passwords and
Settings” on page 6-8).