Avaya manual Ip route, C460-1configure#ip route 192.168.33.0 255.255.255.0, Ip routing

Chapter 2 Avaya C460 CLI Commands

Example:

Router-1(configure-if:marketing) # no ip rip split-horizon

Done!

ip route

User level: read-write, admin.

If you are at the “read-write” user level, you can only access this command in Configure mode.

Type configure at the command prompt to enter configure mode. Use the ip route command to establish a static route.

Use the no ip route command to remove a static route.

The syntax for this command is:

[no] ip route <ip-address> <mask> <next-hop> [<next-hop>] [<next-hop>] [<cost>] [<preference>]

ip-address	The IP address of the network
mask	Mask of the static route
next-hop	The next hop address in the network
cost	The path cost. The default is 1
preference	Preference, either High or Low. Default is Low.

Example:

To define the router 192.168.33.38 as the next hop for the network 192.168.33.0 with mask 255.255.255.0:

C460-1(configure)#ip route 192.168.33.0 255.255.255.0 10.10.10.10

ip routing

User level: read-write, admin.

You can only access this command in configure mode.

Type configure at the command prompt to enter configure mode.

Avaya C460 Reference Guide 59