Avaya C460 manual Ip ospf priority, No ip ospf priority priority, Ip ospf router-id

Chapter 2 Avaya C460 CLI Commands

Example:

Router-1(configure-if:marketing) # ip ospf hello-interval 5

Done!

ip ospf priority

User level: read-write, admin.

You can only access this command in Interface mode.

Type interface [name] at the command prompt to enter Interface mode if necessary.

Use the ip ospf priority command to configure interface priority used in DR election.

Use the no ip ospf priority to set the OSPF priority to its default value.

The default is 1.

The syntax for this command is:

[no] ip ospf priority <priority>

priorityinteger

Example:

Router-1(configure-if:marketing) # ip ospf priority 17

Done!

ip ospf router-id

User level: read-write, admin.

You can only access this command in Router-OSPF mode.

Type router ospf at the command prompt to enter Router -OSPF mode if necessary.

Use the ip ospf router-idcommand to configure the router identity.

Use the no ip ospf router-idcommand to return the router identity to its default (lowest IP interface that exists).

The syntax for this command is:

[no] ip ospf router-id <router id>

router id IP address

Avaya C460 Reference Guide 53